AIRLIVE WL-5460AP V2 FIRMWARE & DRIVERS FOR WINDOWS 10

AIRLIVE WL-5460AP V2 FIRMWARE & DRIVER DETAILS:

Type: Driver
File Name: airlive_wl_32108.zip
File Size: 21.4 MB
Rating:
3.52
238 (3.52)
Downloads: 168
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now
AIRLIVE WL-5460AP V2 FIRMWARE & DRIVER



Watchdog function use PING. Wireless Client Isolation e8 firmware. Green The initialization is normal. Power Initiating. Please ask your dealer for technical support.

To change operation Mode: 1. Select Operation Mode in the main page 3.

WL-5460AP v2

Reboot device 4. This device is shipped with configuration that is functional right out of the box. If you want to change the settings in order to perform more advanced configuration or even change the mode of operation, you can use the web-based utility provided by the manufacturer as described in the following sections. Refer airlive wl-5460ap v2 firmware & the illustration below.

AIRLIVE WL-5460AP V2 FIRMWARE & DRIVERS WINDOWS 7

Users can use this feature to build up a large wireless network in a large space like airports, hotels and schools …etc. Diagnostic functions:. Flash Memory:.

Elite System Introduction 1. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies.

They are used for identification purpose only. Specifications are subject to be changed without airlive wl-5460ap v2 firmware & notice. Operation Mode Wireless Settings System Management Your network security is therefore double assured. The web-based management utility is provided for easy configuration that your wireless network connection is ensured to be always solid and hassle free. When you enable this function, the wireless clients will not be able to see each other. Please follow the procedure below to setup IP Airlive wl-5460ap v2 firmware & Control 1. Before you start, please check the following area to see which client MACs are supported. It differs between each mode. It varies between each mode 4. Step-by-Step Configuration 1. System Management 4.

If your system manager assigned you static IP settings, then you will have to enter the information provided. Subnet Mask: Enter the information provided by your system manager.

SG :: Airlive / Ovislink WLAP v2 Wireless Access Point

Warning: Enabling RTS Threshold will cause redundant network overhead that could negatively affect the throughput performance instead of providing a remedy. This value should remain at its default setting of Should you encounter inconsistent data flow, only minor modifications of this value are recommended.

  • AirLive WLAP Router - Preturi
  • AirLive WLAP Router - Preturi
  • Ovislink ovr2 firmware password
  • Wireless Devices:WL-5460AP
  • Site Map of SimplePortForwarding.com

Beacon Interval Beacon Interval is the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon and learn whether there are buffered frames at the access point.

Data Rate By default, the unit adaptively selects the highest possible rate for transmission. Select the basic rates to be used among the following options: Auto, 1, 2, 5. For most networks the default setting is Auto which is the best choice.ETSI firmware, Airlive WLAPv2_e19, Detalhes, /05/09 EU Firmware versão e19_b3, Adiciona airlive wl-5460ap v2 firmware & Desactivar NAT e Limitar Clientes Wireless.

mercury motherboard pi945gzdFeatured Categories
everfocus epr100c11. Emergency Firmware Recovery
canon ir330sOvislink/Airlive WL-5460AP v2 is supported by dd-wrt ?

ETSI firmware, Airlive WLAPv2_e19, Details, /05/09 WLAP v2, AirLive WLAP firmware version veu (13 channels)., For.

Related Drivers

Leave a Reply

Your email address will not be published. Required fields are marked *