TOSHIBA E-STUDIO 6530C DRIVER DETAILS:
|File Size:||25.8 MB|
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* (*Free Registration Required)|
TOSHIBA E-STUDIO 6530C DRIVER
Overall Eco-Efficiency Eco-efficiency cannot be measured by compliance with environmental standards alone. Note: When taking off the case, do not pull any harness which is coming toshiba e-studio 6530c of the hole in the case. Take off the laser optical unit cooling fan front.
Laser optical unit cooling fan front. Take off the LGC board cover. Disconnect 1 connector and remove 2 screws, and then take off the laser optical unit cooling duct. Release 2 latches and take toshiba e-studio 6530c the duct cover. Take off the laser optical unit cooling fan rear. Remove the laser optical unit. A: Shutter closed B: Shutter opened. Remove 2 screws and disconnect 1 connector.
Take off the shutter motor. Note: Polygonal motor replacement is not recommended in the field; the image quality is not guaranteed in such a case. Note: 1.
Treat the polygonal motor gently. Never touch the surface of the polygonal mirror or glass. If you do toshiba e-studio 6530c, wipe the dirt off using a clean and soft cloth, taking care not to scratch the surface.
Check that toshiba e-studio 6530c 4 fixing screws for the polygonal motor contact the base before fixing the motor. When installing the polygonal motor, neither hold the condenser element on the board nor damage the mirror with a screwdriver.
Toshiba e-STUDIO C
Polygonal motor Fig. The paper feeding system mainly consists of the pickup roller, feed roller, separation roller, transport roller, registration roller, bypass paper sensor, drawer empty sensor, bypass feed sensor, drawer feed sensor, registration sensor and drive system for these components. The 3rd and the 4th drawers are not installed but instead the Tandem LCF is installed. Pickup roller Drawers and bypass feed This roller moves up and down and draws out the paper from the bypass tray or drawer and transport it to the feed toshiba e-studio 6530c.
Feed roller Drawers and bypass feed This roller is placed against the separation roller. It transports the paper from the pickup roller to the transport toshiba e-studio 6530c. Separation roller Drawers and bypass feed This roller is placed against the feed roller.
When two sheets of paper or more are transported from the pickup roller, the load of the torque limiter of the separation toshiba e-studio 6530c is heavier than the frictional force between the sheets. As the result, the separation roller is stopped and the lower paper is not advanced any further.
When only one sheet is transported from the pickup roller, the separation roller rotates following the feed roller. Transport roller Drawers and bypass feed This roller transports the paper sent from the feed roller to the toshiba e-studio 6530c roller. Registration roller Paper transported from the transport roller is pushed against the registration roller which aligns the leading edge of the paper. Then, toshiba e-studio 6530c registration rollers rotate to transport the paper to the transfer unit. Bypass paper sensor S71 This sensor detects if paper is set in the bypass tray.
Toshiba e-STUDIO C / C / C CopierPrinter
If it is, bypass feeding always comes before drawer feeding. Media sensor S69 This equipment has a media sensor to measure the thickness of copy paper. The media sensor detects the thickness of paper that is fed only from feeding devices other than the bypass toshiba e-studio 6530c.
- Toshiba e-STUDIO C FOR SALE at Low Price!
- Support: Drivers, Manuals, Tutorials Toshiba Business
- E Studio C - Toshiba E-Studio - Toshiba - Ink & Toner
- Toshiba E Studio 6530C
- TOSHIBA e-STUDIO 6530C
- Toshiba E STUDIO 6530C Toner Cartridges
The sensor toshiba e-studio 6530c 2 functions as follows: 1 The sensor classifies plain paper When the sensor judges that the setting is not correct, printing automatically stops. Error code: EE Media type mis-setting jam Even though media types are classified with its paper weight in general, the thickness of paper is not always proportional to the paper weight.
Toshiba e-STUDIO 6530C
Therefore the sensor makes the equipment stop printing only when a users media type setting is obviously incorrect. Whether enabling or disabling the function 2 above can be switched in the code In case the media sensor fails, no error code is displayed.The e -STUDIOc/c/c Series satisfies the toshiba e-studio 6530c input and print shop—you'll find that this new Series from Toshiba performs flawlessly. TOSHIBA e-STUDIO C - Digital Copier Supercenter provides Chicago area and toshiba e-studio 6530c whole US with digital, color, black & white copiers, printers and.
|metrologic ms 7320||Your request has been submitted!|
|hp designjet t1100 printer||Toshiba e-STUDIO 6530C|
|aiptek hyperpen 6000 u||You are here|
|jvc gr-dx95 usb||TOSHIBA e-STUDIO 6530C|
|dell latitude d505 ethernet controller||Photocopier Service and Supply to London Business for 30 years|